background image

 

M

  odel

                                                                                                                                         

 

  

Thank you for purchasing the

 PDR 

 panel display wall mount.  

To ensure the correct usage, please read and follow the instructions  manual thoroughly. Please store the instructions in a safe place  for future reference.  

 

 
 
 
 
 
 
 
 

 

 

 

  

                                               

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

           Features 

  

1

All  PDR mounts and adapters carry a limited lifetime warranty against defects in material and workmanship. 
We are not liable for improper installation that results in damage to mounts, adapters or presentation equipment.

Mounts by

 

 A division of David Engineering & Mfg. Inc.

PDM 625T PANEL DISPLAY MOUNT

Low profile 2 5/8”
16”, 24” or 32” stud mounting
Easy installation
Flat to 13 deg tilt 
Lateral movement from center for better viewing position

To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the 
weight of both the  display and the mount.
Always use at least two persons for all installations. 
Fully tighten all of the mounting screws as specified in the installation instructions.

 

                       

Special techniques are necessary for installation of the panel display mount.

?

Do not attempt to perform this work by yourself.

?

Request an installation specialist to install this unit. 

?

Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling. 

?

Please remember that if you remove the panel display from the wall later, you will find the screw holes and anchor bolts for the mounting

       unit left on the wall.  Also note that long use of the panel display may discolor the wall around it due to its heat and airflow.  

Reviews: