1
C -
Assembled Cabinet
x 1
Mirage is engineered for easy assembly. Carefully follow this
procedure to prevent any damage.
Placement and Maintenance
Mirage is designed for indoor use on level floors. Clean glass with
glass cleaner; clean steel parts and painted surfaces with a moist
cloth.
STEP 1
Unpack and Identify
Unpack and identify the components at left. Note that some
components are shipped inside the cabinet. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces please contact BDI Customer Service
at [email protected]. For all other concerns, please
contact your BDI Retailer.
STEP 2
Leveling and Shelf Adjustment
Component List
Designed by Al Glass and Cristian Wicha.
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. ©2012, BDI
Made in China. 8237REV051512v1
MIRAGE
(SEMBLANCE EDITION)
8237
a s s e m b l y
i n s t r u c t i o n s
bdiusa
.
com
customerservice
@
bdiusa
.
com
B
- Allen Wrench x 1
A
- Phillips Screwdriver
x 1
For more information about the adjustable levelers
and troubleshooting, be sure to check out “Fine
tuning your new BDI Mirage Home Theater
Furniture” at the end of these instructions.
E-
Back Panel x 2
D -
Adjustable Shelf x 3
Adjustable leveler glides
are accessible from inside
the cabinet using the
Allen
Wrench (B).
The shelf pins located inside
the cabinet space may be
repositioned, allowing you to
raise or lower each shelf to
the desired level.
Shelf Pin
B
A
C
