1
Hold the PAX S80 face down on a table or work place.
Plug the power adapter connector into the S80 “Power” jack (middle).
Plug the PAX S80 power cord into electrical outlet or power bar.
Plug the required communication cord(s) into the proper sockets.
Plug the Ethernet cable into the “LAN” socket, and/or plug telephone
line cable into the “LINE” socket.
Switch the terminal on by pressing the Power button.
If you have not already change the
default password (000000)
Press
MENU
to access
ADMIN MENU
Press 3 for
SET-UP
Press 2 for
HOST SET-UP
Enter new
ADMIN PASSWORD
, press OK
Enter the 8 digit
TERMINAL ID
(TID), press OK
Set
FALLBACK TO DIAL
to YES if required
(Default communication is
ETHERNET
)
SELECT INPUT TYPE
should be set to IP
IP ADDRESS
should set at 206.152.27.137
NAME
should be set at ww.ctpaiement.com
PORT NUMBER
should be set at: 5085
Press
MENU
to access
ADMIN MENU
Press 3 for SET-UP then Press 3 for
SYSTEM SETUP
Enter Admin Password, press OK
TERMINAL DATE
will be set automatically by host
TERMINAL TIME
will be set automatically by host
Main Communication mode default setting
ETHERNET
To change communication mode use Down scroll arrow to select
DIAL
If the terminal is set to
DIAL
communication:
Set the
DIAL TYPE
to TONE or PULSE using up/down buttons
Set the
LINE DETECTION
to Yes/No using up/down buttons
Set the
BAUD RATE
to 1200 or 2400 using up/down buttons
PORT FOR ECR
should be set to 9999, press OK
Set
ETHERNET SETUP
to dynamic or static using up/down buttons
If ETHERNET SETUP is DYNAMIC IP interface will synch automatically
If ETHERNET SETUP is set to STATIC IP:
Enter
TERMINAL IP ADDRESS
, press OK
Enter
MASK IP
, press OK
Enter
GATEWAY IP ADDRESS
, press OK
Enter
PRIMARY DNS ADDRESS
, press OK
Power button to turn terminal ON/OFF
The PAX S80 menu functions are arranged in
two menus: Transaction and Administration
Scroll buttons are used to scroll through to
display menu options
To access letters on the numeric keypad,
press the key quickly until the desired letter
appears
Press 0 (zero) twice for space
Press Up button for [*]
Press Down button twice for [•]
Use yellow CORR button to go back one step
Press
MENU
to access the
ADMIN MENU
Scroll menu to 9 or Press 9 for
PASSWORD
Press 2 for
ADMIN PASSWORD
Enter default password
000000
, press OK
Enter new Admin password
Confirm new Admin password
PAX S80 Set-Up Guide
