DO
GUIDE
DO
Check the Box
QTY PRODUCT
COLOR
PART NUM.
1
Key
4519804
4
Screw, 06-32 x 3/4", Truss Head, Combo
2009211
4
Screw, M3 x 16 mm, Flat Head, Phillips
2013788
2
Screw, M3.5 x 25 mm, Pan Head, Phillips
2028659
Items for TSS-752-B-S Only
2
Cover, Mounting Plate, Low Profile
Black
4520153
1
Plate, Plastic, Wall Mount, 6.27" x 4.21" x 0.38"
Black
4519719
Items for TSS-752-W-S Only
2
Cover, Mounting Plate, Low Profile
White
4520152
1
Plate, Plastic, Wall Mount, 6.27" x 4.21" x 0.38"
White
4519681
3. Carefully position the TSS-752 over the wall mount plate to engage the four screws
protruding from the wall mount plate. Slide the TSS-752 to the left until it clicks into place.
NOTE
: In some situations where there may not be enough room to slide the TSS-752 to
the left, the wall mount plate can be installed with the locking tabs on the left side. In such
cases, attach the TSS-752 by sliding it to the right until it clicks into place.
4. Make connections to the TSS-752 using Crestron power supplies for Crestron equipment.
Apply power after all connections have been made.
TSS-752
7" Room Scheduling Touch Screen
DO
Install the Touch Screen
The Crestron
®
TSS-752 touch screen installs into a standard 2-gang (or horizontally mounted
1-gang) U.S. electrical box, a 2-gang European electrical box, or a 2-gang U.K. electrical box. It
can also be installed over a small cutout (for Ethernet access) on virtually any mounting surface.
To mount the TSS-752 into an electrical box, use the following procedure:
1. Use four of the eight included screws (four 06-32 x 3/4" or four M3 x 16 mm) to attach the
wall mount plate to the electrical box.
NOTE
: For U.S.-style installations, use the 06-32 x 3/4" screws and a #2 Phillips
screwdriver. For European-style installations, use the M3 x 16 mm screws and a #1 Phillips
screwdriver or equivalent.
2. Gently snap the two mounting plate covers into place to hide the screws going into the
electrical box.
Wall Mount Plate
Screws (4)
Electrical Box
Wall Mount Plate
Mounting Plate
Covers (2)
TSS-752
Wall Mount Plate
LAN PoE:
10BASE-T / 100BASE-TX
Ethernet to LAN
Reset Button
