Page 1
`
UBi
©2022 All rights reserved. All specifications are subject to change without notice.
Creative Lighting 4 Pine Street North Ipswich QLD Australia
Email: [email protected] www.creativelighting.com.au +617 32828777
UBi V2 Test and Power
User Manual
Issue: May 2022
Description
The UBi Test and Power is a patented Australian invention and is a
DALI connect/disconnect, test and distribution device. The Ubi
provides distribution of DALI via 5 parallel DALI connections which
may be individually connected and disconnected as required, for
example during commissioning.
The UBi also provides a visual warning of unsafe voltages e.g.
240VAC mains voltage.
The 4mm banana sockets provide a quick, easy, and safer means
of connecting to a DALI line.
A test button on the keypad provides an easy Min/Max DALI output
that is used to test DALI communication.
Please note that the UBi Test Functionality is disabled by default and will return to disabled on power
cycle. To enable, long press the test button for 4 seconds. Please see functionality below.
Functionality
The UBi has a test button on the front which allows for a 10-minute Min/Max test. The device will send
out DALI Broadcast RECALL MAX and RECALL MIN until the timer has expired, or the button has been
pressed a second time. A mimic LED on the device will also flash at the same rate.
The test functionality can be enabled by holding in the test button for 4 seconds. To exit this mode,
hold the test button in for another 4 seconds, or power cycle the device.
Pressing the test button during disable mode will quickly double flash the LED but will not send out
DALI.
Default operation is test functionality disabled.
Physical
The case is made from UL94V0 flammability rated material and suits standard DIN rail
mounting. The UBi is 37mm (w) x 110mm (h) x 63mm (d).
