PART NUMBER: SE1002
THIS KIT WORKS WITH: AND MOST AFTERMARKET SEAT COVERS.
IT CAN ALSO BE USED WITHOUT SEAT COVERS.
INSTALLATION
INSTRUCTIONS
IMPORTANT
PLEASE READ ALL INSTRUCTIONS PROVIDED WITH HEATING ELEMENT KIT AND
NOTE ALL CAUTIONS BEFORE CONNECTING ELEMENTS TO VEHICLE POWER.
STEP 1. With non-slip side of the envelope
facing down, insert heater elements into
envelopes. Make sure the blue side faces
upward, with the electrical connectors
protruding out of the envelopes.
STEP 2. Turn units over and close envelopes
with hook and loop fasteners.
STEP 3. Make sure heating elements are
positioned correctly in envelopes.
STEP 4. Pull back existing seat covers to
access seat cushions and backrests. Install
the seat base envelopes with non-slip side on
seating surface.
COVERCRAFT INDUSTRIES, INC. Pauls Valley, OK Form # 1320083 (10/12)
Page 1 of 2
