1
PARTS LIST
RTS016G
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
Step 1:
Insert the right and left arms (#1 and #2) into the cross
brace (#3) on both sides. Fasten them together by using
bolts (#7), washers (#12) and plastic nuts (#13). Keep
the bolts loose. See Figure 1.
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PAGE 1 OF 3
COURTYARD CREATIONS INC.
PART
NO.
MATERIAL CODE
PART
Q’TY
2
3
4
5
6
7
1
1
12
11
10
9
8
2
2
2
1
1
FIGURE 1
RTS016G-CS01-3
RTS016G-CS01-2
62RTS016PH101
RTS016G-CS02-1
RTS016G-CS03-1
RTS016G-CS04-1
17C33A0710001Y4
17C33A0706001Y4
17FA05040301-Y4
18000C23001
18000337001
17KAA0101----Y4
17KAB1101----Y4
RIGHT ARM
LEFT ARM
CROSS BRACE
BOTTOM FRAME
SEAT ASSEMBLY
BACK ASSEMBLY
BOLT M6*30
BOLT M6*16
BOLT M6*55
BOLT M6*50
BOLT M6*35
WASHER d6.5*D13*1.0
PLASTIC NUT M6*P1.0
BOLT CAP M6
18000337004
BOLT CAP
HEX.KEY WRENCH 4MM
NUT WRENCH 10&13MM
28
6
10
8
1
1
1
1
2
6
17
16
15
14
13
17C01A0719071Y4
17C01A0712001Y4
17C01A0717071Y4
STOP
DON’T RETURN TO STORE!
1
2
3
7
14
12
12
13
R
L
30
#7 BOLT M6*30
Note:
The labels marked “R” and “L” on the arms (#1 and #2)
should coincide with Figure 1 to ensure proper assembly.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
!
!
!
!
!
Use the correct bolts as indicated. Do not tighten any of the bolts until the glider is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
