manualshive.com logo in svg
background image

Figure 1.
Kyle

®

Type GWC Sectionalizer.

88973KMA

Contents

Safety Information .................................................. 2

Hazard Statements .............................................. 2
Safety Instructions ............................................... 2
Additional Information .......................................... 2

Shipment and Acceptance..................................... 2
Handling and Storage 
............................................ 2

General ................................................................ 2
Control Battery Charging and Storage................. 3

Description.............................................................. 3
Ratings 
.................................................................... 3
Dimensions and Weights
....................................... 4
Operating Controls
................................................. 4

Remote Control Switch ........................................ 4
115Vac - 5 amp Breaker Switch........................... 4
Manual Control Switch ......................................... 4
One Count to Open Switch .................................. 5
Lamp Test Contact Position Switch ..................... 5
Battery Test Terminals ......................................... 5
Battery Load Test ................................................. 5
Manual Trip Lever ................................................ 5

Indicating Devices .................................................. 5
Settings 
................................................................... 5

Minimum Actuating Current ................................. 6
Counts-to-Open ................................................... 6
Count Reset ......................................................... 6
Count Restraint .................................................... 6
Inrush-Current Restraint ...................................... 6
Response Time.................................................... 6

Installation............................................................... 7

Preliminary Checks .............................................. 7
Lifting the Sectionalizer........................................ 7
Mounting the Sectionalizer .................................. 9
Mounting the Control ........................................... 9
Grounding the Control ......................................... 9
Control Cable ....................................................... 9

Auxiliary Power....................................................... 9

Main Wiring .......................................................... 9

Interconnection Wiring Diagram ........................... 11
Interconnection Wiring Diagram, Control 
............12
Accessories 
............................................................13

Auxiliary Switch....................................................13
Bushing-Type, Multi-Ratio Current Transformers 14

Operating Instructions ...........................................14

Automatic Operation ............................................14
Manual Electrical Operation.................................15
Manual Non-Electrical Operation .........................15

Control Battery .......................................................15

Battery Connections ............................................15
Battery Check ......................................................15

Testing .....................................................................16

Test Circuit and Equipment ..................................16
Pre-Test Procedures ............................................16
Test Procedures ...................................................16
Post-Test Procedures ..........................................19

November 1991• Supersedes 12/88

Printed in USA

Cooper Power Systems

Service Information

Sectionalizers

Type GWC
Installation Instructions

S270-21-1

Applicable to serial number 1088 and above

Содержание GWC Series





















Отзывы: