Chapter 1 Installation
█
For USB 2.0 device
Installation
1.
Please plug the power adapter and USB cable then turn on the switch.
2.
Once connections are complete, Windows will automatically enumerate (establish a
drive letter for the device), and the blue LED on the device will start blinking.
3.
After a few seconds, when the blue LED stops blinking, the device is ready for use.
Then a pop-up window will appear, as in the diagram below, to indicate the presence
of the USB device. This device will be recognized by the computer as a USB device.
Safely Removal
1.
Please right click the green icon in the control bar and safety removal the hardware.
