![background image](http://html.mh-extra.com/html/connect-a-dock/pwc-port-2000-series/pwc-port-2000-series_installation-and-use-manual_2652870001.webp)
1/21/21
Please note that placing a port in an
unsuitable location may void any warranty
provided by Connect-A-Dock. Please contact
PWC Port or your local distributor or dealer if
you have any questions regarding the
suitability of your particular dock location.
Installation
All specifications provided by PWC Port are based upon PWC Port test data and are provided without representation or warranty. Actual
specifications, weights and dimensions may vary for a variety of reasons, including, without limitation, due to the rotational molding process.
Specifications should be regarded as nominal values only and not as binding actual values. Please contact PWC Port if you have specific
questions regarding the specifications of any PWC Port product.
PWC Port Product Installation and Use Warning Disclaimer
Repairs of a PWC Port should only be performed
by an authorized PWC Port technician. If repair
is performed by unauthorized persons, serious personal
injury and/or property damage could occur.
If unauthorized personnel repair a PWC Port,
PWC Port hereby disclaims any and all
warranties, expressed or implied. PWC Port
limits its warranty to PWC Port's published
PWC Port warranty furnished with each product.
No other warranty of any kind either verbal or implied
including warranties of merchantability and fitness for
a particular purpose are recognized.
The contents of this manual are subject to change
without notice and should not be construed as a
commitment, representation, warranty or guarantee
of any method, product or device by PWC Port.
Reproduction or translation of any part of this
manual, without the written permission of PWC Port,
is prohibited.
Any inquiries concerning the PWC Port published
warranty or this manual and its contents please
contact PWC Port.
For low maintenance cleaning use a stiff
broom or brush with a garden hose. A
pressure washer with no heat can also
be used. When using soap, use an
environmentally safe product.
Cleaning
Dock anchoring methods listed in this
instruction manual are only suggestions.
It is up to you to determine which
method suits your needs.
Anchoring
Part #S01110
Connect-A-Dock 2000 Series-High Profile Attachment
connectadock.com | 1501 Owner Avenue, Atlantic, IA 50022 USA
Instructions for:
2000 Series Attachment Kit
Step 2
Secure with bolts, washers, and
bushings. Tighten all bolts in the XL6
using 25 lbs/ft (3.46 kg/m) of torque.
Step 1
Determine port location (Front or Side).
Insert 2ooo Series XL6 Connectors into
float section connector slots.
Tools Needed
(1) 9/16” Wrench
Step 3
Continue by hooking the XL6 over
the 2000 Series XL6 Connectors,
shift your body weight to the XL6.
Step 4
Secure with bolts, washers, and
bushings. Tighten all bolts in the XL6
using 25 lbs/ft (3.46 kg/m) of torque.
1
1
3
4