INS_CLFEXUTP_REV–
09/28/11
PAGE 1
INSTALLATION AND OPERATION MANUAL
CLFE(X)UTP
EThERNET-oVER-UTP/TwISTEd PAIR EXTENdER
wITh PASS-ThRoUGh PoE
The ComNet
™
CopperLine® CLFE(X)UTP Ethernet over UTP line consists of four
models that support 100Mbps Ethernet as well as Pass-through Power over Ethernet
(PoE) over twisted pair cable (CAT5, UTP). These models support transmission
distances of up to 3,000 feet (914m) at 10 Mbps, or 2,100 feet (640m) at 100 Mbps.
The CLFE1UTP, the CLFE4UTP, CLFE8UTP and the CLFE16UTP transport, one, four,
eight or sixteen channels respectively. The IEEE 802.3-compliant Ethernet electrical
interface of these Ethernet extenders also meets the requirements for IEEE 802.3af
PoE power, passing-through up to 30 watts of power per port to the powered device
(Pd). The CLFE(X)UTP series may also be used interchangeably with other CopperLine
Ethernet-over-UTP extenders.
Environmentally hardened to the requirements of NEMA TS-1/ TS-2 for most out-of-
plant applications, and true plug-and-play design ensures ease of installation and
operation.
LEd indicators are provided for rapidly ascertaining the operating status of the
device. See
Figures 6 – 8
on
Page 7
for LEd explanations.
Packaged in a rugged aluminum housing, these units are designed for desktop or stand-
alone mounting. The CLFE8UTP and CLFE16UTP are offered in EIA 19” 1U high rack for
easy installation. See
Figures A
through
C
on
Page 8
for mounting instructions.
See
Figures 1 – 8
for complete installation details.
Important Safety Warning:
Read and keep these directions
heed all warnings
Follow all instructions
do not use this apparatus near water
Clean only with a dry cloth
Install in accordance with the manufacturer’s
instructions
This installation should be made by a qualified
service person and should conform to all local codes
See further safety instructions on Page 8
