background image

Warning for Safety

* Do not disassemble, repair or modify the device by any unauthorized person.
* This product is for indoor, we do not guarantee any operation at other environment.
* Please use the product after reading User’s Manual.
* Do not press the buttons with any tools(Ex. Awl, Pins..)
* Change your password from time to time for your safety.
* Do not impact on the device.
* Be careful that leakage or rupture may occur when inserting a battery in wrong direction.
* Be careful that water should not seep into the device.
* When replacing a battery, change all the batteries with new alkaline batteries.
* Please wipe the product with soft, dry towels.
* Do not use this product with other purposes except digital door lock function.

     Due to non-key door lock, it may cause 
destruction of digital door lock when it is in trouble.

COMMAX Co.Ltd.,

Thank you for purchasing COMMAX products.

Please carefully read this User’s Manual(in particular, precautions for safety) before using a product and follow 

instructions to use it correctly. The company is not responsible for any safety accidents caused by abnormal

operation of the product.

USER MANUAL

These warnings are to secure user’s safety and prevent the possible loss of property.
Please read carefully below to use the product in a correct manner.

CDL-800WL(Fingerprint)

CDL-100WL(SMART KEY)

Summary of Contents for CDL-100WL













Reviews: