background image

GREAT BRITAIN • CUSTOMER SERVICE

tel: 020 8247 9300  internet: www.clasohlson.co.uk

e-mail: [email protected]

ENGLISH

Ver. 20160428

Timer

Art.no  34-2362

Please read the entire instruction manual before 
use and save it for future reference. We reserve 
the right for any errors in text or images and for 
making any necessary technical changes to this 
document. If you should have any questions 
concerning technical problems please contact our 
Customer Services. 

Operating instructions

Countdown timer setting

•  Press [ MIN ] or [ SEC ] to set the desired time.
•  Holding the [ MIN ] or [ SEC ] button down will 

change the time quicker.

Starting the countdown

•  When the desired time has been set and is 

shown on the display, press [ START/STOP ] to 
start the countdown.

•  The timer will countdown until it reaches zero. 

At zero, an audible signal will sound until you 
press [ START/STOP ]. If the button is not 
pressed down the signal continues to sound 
for approx 60 seconds.

Starting the stopwatch

•  Zero the time by pressing [ MIN ] and [ SEC ] 

simultaneously.

•  Press [ START/STOP ] to start the stopwatch.
•  Press [ START/STOP ] to stop the stopwatch.

If you want to interrupt or reset 

the timer before the set time is up

•  If you wish to stop the countdown before 

the timer reaches zero, press [ START/STOP ]. 
The time can be reset to zero by pressing 
[ MIN ]  and  [ SEC ]  simultaneously.

•  The countdown can be paused by pressing 

[ START/STOP ]. The countdown can be 
resumed by pressing [ START/STOP ] 
once again.

Built-in memory

You can use the previous countdown timer setting 
by pressing [ START/STOP ] after the alarm has 
gone off. If you wish to set a new countdown 
time, first clear the old time by pressing [ MIN ] and 
[ SEC ] simultaneously and then repeat the steps 
under 

Countdown timer setting

 above.

Note:

 If the battery has been replaced, the timer 

needs to be reset by pressing [ MIN ] and [ SEC ] 
simultaneously before it being used.

Care and maintenance

Clean the product by wiping it with a soft,  
dry cloth. Never use solvents or abrasive  
cleaning agents.

Responsible disposal

This symbol indicates that this 
product should not be disposed 
of with general household waste. 
This applies throughout the entire 
EU. In order to prevent any harm 
to the environment or health 
hazards caused by incorrect waste 
disposal, the product must be 
handed in for recycling so that 
the material can be disposed of 
in a responsible manner. When 
recycling your product, take it 
to your local collection facility or 
contact the place of purchase. 
They will ensure that the product is 
disposed of in an environmentally 
sound manner.

Specifications

Batteries 

1 × AAA/LR03 (sold separately)

Max time 

99 min 59 sec

Reviews: