background image

SCREENED WEATHERMASTER

17'X9'

1

Layout & Positioning of Tent

– Layout and position tent with screen room

facing desired direction. (illus. 1)

– Stake down tent, starting with 

the corners. Do not stretch 
too tight. Angle the stakes 
slightly toward the tent. 
(illus. 2) Keep the floor taut.

– Stake down the remainder 

of the stake loops.

– Unzip the door.

2

Assemble & Place Roof Poles

– Assemble all shock-corded 

roof poles. When assembled will 
form a continuous arch with both
ends pointing down. (illus. 3)

– Select center roof poles with

red stickers, then insert through 
the two center roof sleeves and 
the roof pole sleeve at the front 
of the screen room. (illus. 4)

– Select end roof pole, with blue 

sticker, then insert through the roof 
sleeve at end of the tent. (illus. 4)

When You Are Ready 
To Set Up Your Tent

– Select a level campsite 

clear of rocks, branches 
and other hard or sharp
objects. 

– Do not set up your tent

under trees. 

– For best results in windy

conditions, position the 
end of tent into the wind.

(3) Center Curved Roof Poles 

(Red Sticker) Part No. 9232C372

(1) Rear (Blue Sticker) 

Part No. 9232C373

(6) Center Upright Poles

(Red Sticker) Part No. 9232C374

(2) Rear Brace Poles 

(Blue Sticker) Part No. 9232C375

Rainfly Part No. 9232C371

Instructions apply to Part Number 9232C379

illus. 3 Curved roof pole assembly. 

illus. 4 

Curved roof pole system shown 

inserted through pole sleeve.

illus. 2

Stake loops 

properly staked

Front of 
screen 
door

Roof sleeve

illus. 1 

Roof pole sleeve

Shock-corded poles

Forms an arch

POLE ASSEMBLY PARTS

Reviews: