AMERICAN HERITAGE
™
WEATHERMASTER
®
CABIN 12'X9'
1
Layout & Positioning of Tent
– Layout and position tent with door
facing desired direction. (illus. 1)
– Stake down tent, starting with
the corners. Do not stretch
too tight. Angle the stakes
slightly toward the tent.
(illus. 2) Keep the floor taught.
– Unzip the door.
2
Assemble & Place Roof Poles
– Assemble all shock-corded
roof poles. When assembled will
form a continuous arch with both
ends pointing down. (illus. 3)
– Insert the curved ridge roof pole
through center roof pole sleeve.
(illus. 4)
– Insert the curved End roof poles
through end roof pole sleeves.
(illus. 4)
When You Are Ready
To Set Up Your Tent
– Select a level campsite clear
of rocks, branches and other
hard or sharp objects.
– Do not set up your tent
under trees.
– For best results in windy
conditions, position the end
of tent into the wind.
(1) Center Curved Roof Poles
(Red Sticker)
Part No. 5010000474
(2) Rear Curved Roof Poles
(Green Sticker)
Part No. 5010000475
(2) Center Adjustable Upright Poles
(Red Sticker) Part No.
5010000477
(4) Rear Adjustable Brace Poles
(Green Sticker) Part No.
5010000476
Rainfly Part No. 5010000478
Instructions apply to Part Number 2000000148
illus. 3
Curved roof pole assembly.
illus. 4
Curved roof pole system shown
inserted through pole sleeves. (3 total)
illus. 2
Stake loops
properly staked
Front door
Roof sleeve
illus. 1
Pole sleeves
Shock-corded poles
Forms an arch
POLE ASSEMBLY PARTS
Hinged Door Pole
Part No. 5010000513
Vertical Hinged Door Pole
Part No. 5010000512
