User Manual
Remote Control
WASPcam 9820WR
NOTE**: Before pairing the remote to the camera, format the MicroSD card in the camera.
How To Pair the Remote:
1.
When the camera is in standby mode, press the menu button twice to enter
system settings.
2.
Press the left/right arrow buttons to scroll through the menu, choose remote
control to enter the remote menu. Then select Remote Match.
3.
A message will appear on the LCD Screen
“
Wait Remote Match
”
, the camera is
now in pairing mode.
4.
At the same time, press both buttons on the remote controller to start
pairing. Pairing is successful when the LCD screen shows
“
Remote Match
OK
”
1 - Indicator light
2
–
Photo Button - press to take photos,
Press the Inquiry/Record Button (3) and the Photo
button (2) simultaneously to enter Pairing mode
3
–
Inquiry/Record Button
–
press to start/stop
recording, press and hold for 3 seconds to check
the present status of the camera (see below)
Remote Control Indicator Light Status
Status/LED
Red LED Light
Blue LED Light
Standby
1 time/sec frequently
Flickers about 5sec
Off
Recording
Off
Light on 3 seconds, then off
Status Inquiry
Power off
Light on 3 secs, then off
Off
Pairing
Long light
Long light
Success
Light on 3 secs, then off
Light on 3 secs, then off
Pairing Mode
Failure
Off
Off
