Cleveland
™
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: [email protected]
GAS KETTLES
Cleveland Standard Features
n
Self-contained gas tilting kettle is easily installed, only needs
a gas connection and a 115 volt outlet.
n
Precise, consistent temperature control, less than 1ºC
temperature variance (ideal for simmering). Operating
temperature range from 145ºF-260ºF (63ºC-127ºC).
n
"Splash-Proof" Solid-State Control Panel for temperature, Low
Water Safety, and Power "On/Off" Switch. Accurate L.E.D.
Indicators for Heat Cycle and Low Water Warning.
n
Kettle and all exterior surfaces are a 304 Stainless Steel with
a #4 finish.
n
Energy efficient (65%), high performance gas-fired heating
system for fast heat-up and recovery time:
n
Twenty-five gallon model with 90,000 BTU firing rate and
58,500 BTU directly applied to the product.
n
Supplied with Gas Pressure Regulator.
n
Standard for natural gas operation.
n
Large pouring lip for easier, faster, pouring. Heavy-duty
Rolled Rim design provides strong reinforcement, prevents
damages from abuse.
n
"Splash-Proof" rear-mounted pressure/vacuum gauge.
n
Steam jacket permanently filled with treated distilled water;
venting and/or refilling is not required.
n
50 psi Steam Jacket Rating. Safety Valve mounted toward
rear of kettle to avoid tampering.
n
Automatic Electronic Spark Ignition System.
n
Supplied with cord and plug for 115 volt controls.
n
Tilt Mechanism of roller bearings and case hardened
self-locking worm and segment gear.
n
Support Legs with level adjustable feet, flanged for floor
bolting.
n
Typical approvals include AGA, CSA, CE, NSF and ASME.
Options & Accessories
p
316 Stainless Steel Liner (316)
p
Propane Gas Option (LP)
p
Kettle Markings (KM)
p
Spring Assist Cover (CHS)
p
Lift Off Cover (CL)
p
Basket Strainer (BS and TBS)
Shall be CLEVELAND, Gas Kettle, self-contained, tilting, Model KGL-25-T; 25
gallons, natural or LP gas, 2/3 Steam Jacketed, Type 304 Stainless Steel and
supports. Jacket rated at 50psi with Safety Valve. Complete with "Splash-
Proof" Solid-State Water Level, Temperature, and Safety Low Water Power
Cut-Off, including L.E.D. Indicators for Heat Cycle and Low Water Warning.
p
Measuring Strip (MS)
p
Food Strainer (FS)
p
Hot and cold water faucet (DPK), or cold water (SPK).
Requires faucet bracket (FBKT)
p
2" Tangent Draw-Off Valve (TD2)
p
Kettle Accessory Kit (KAK) includes:
p
Clean-up Brush (CB)
p
36˝ Kettle Paddle (KP)
p
36˝ Kettle Whip (KW)
p
36˝ Kettle Brush
p
Draw-Off Brush (DB)
p
24 oz. Ladle (KL)
p
Correctional Packages
Short Form Specifications
MODEL
:
c
KGL-25-T
Shown with optional Spring Assisted
Cover and 2" Tangent Draw-Off Valve
LEG TYPE, GAS-FIRED KETTLES
TILTING, 2⁄3 STEAM JACKETED
“SPLASH PROOF SERIES”
25 GALLONS (100 LITERS)
SECT.
IX
PAGE
3
0707
