background image

Form No. 71483A    12/08 revised 10/12  

      

                  Clarke

®

  

Disc 26 / Disc 28 / Disc 34

/

Cylindrical 28 

MID-SIZE

AUTOSCRUBBER

®

Patents Pending

Operator’s Manual / Manuel d’utilisation / Libro de Instrucciones

Models: 05370A, 05370C(OBS), 05380A, 05380C(OBS), 05390A, 05390C(OBS), 05400A, 05400C(OBS), 05410A, 05410C(OBS), 
05420A, 05420C(OBS), 56380651(OBS), 56380657(OBS), 56380658(OBS), 56380659(OBS)

This book has important information for the use and safe operation of this machine.  Failure to read this 
book prior to operating or attempting any service or maintenance procedure to your  Clarke  machine 
could result in injury to you or to other personnel; damage to the machine or to other property could 
occur as well.  You must have training in the operation of this machine before using it.  If your operator(s) 
cannot read this manual, have it explained fully before attempting to operate this machine.

All directions given in this book are as seen from the operator’s position at the rear of the machine.

 English (2 - 27)
 Español (28 - 53)
 Français (54 - 79)

READ THIS BOOK

LEA ESTE MANUAL

LISEZ CE MANUEL

ES

EN

FR

U.S. Patent No. 6,105,192; No. 6,760,947; and Patent Pending

Summary of Contents for Cylindrical 28





























































































































Reviews: