background image

1

Issue 4, June 1995

(540) 427-3505

S-615 AND S-650 PAGING HORNS

INTRODUCTION

The S-615,  and S-650 are Paging Horns for use with
any Clarity Mixer-Amplifier.  The S-615 (15 watts) is a
combination 25/70V paging horn.  The horns can be
used for interior or exterior paging applications.  The
S-650 is a combination 25/70V, 30 watt Bi-Axial
paging horn.

These instructions contain the specifications and
information necessary to install, operate, and maintain
the horns.

SPECIFICATIONS

Applications

- Clarity Paging Systems
- Existing 25 or 70V Paging Systems

Features

- Combination 25/70V transformer
- Weatherproof
- All metal construction (S-615);
  S-650 Projector structural foam and driver
  is all metal construction
- Grey baked epoxy finish
- Fully adjustable 360 degrees horizontal and
  160 degrees vertical
- Rotary switch for tap selection

Environment

Temperature:

0-50 Degrees C

Humidity:

0-85%

Horn Taps

    Switch Setting

S-615, 25/70V                     25V                       70V        

15 

Watts

  7

  5

7.5

Watts

  6

  4

3.8 

Watts

  --

  3

1.8

Watts

  5

  2

.9

Watts

  4

  1

.48

Watts

  3

  --

    Switch Setting

S-650, 25/70V                     25V                       70V        

30 

Watts

  --   

  5

15

Watts

  7

  4

7.5 

Watts

  6

  3

3.7

Watts

  5

  2

1.8

Watts

  4

  1

Specifications

Frequency Response and Maximum Power
Handling Capability                                                          
S-615

275-14K15 Watts

S-650

120-14K30 Watts

SPL @ 4FT at Rated Output                                            
S-615

121dB

S-650

127dB

Line Voltage

25/70V

Cabling

When using the S-615 or the S-650, two conductor
shielded cable is recommended for horn connections. 
NOTE:  When shielded cable is used, the shield should
be connected to the Ground terminal located on the
back of the amplifier.

TECHNICAL ASSISTANCE

When trouble is reported, verify there are no broken
connections leading to the unit.

Assistance in troubleshooting is available from the
factory.  When calling, you should have a VOM
available and be calling from the job site. Call 1 (540)
427-3505 and ask for an Applications Engineer.

CLARITY equipment is not field repairable. 
CLARITY maintains service facilities in Roanoke, VA.
 Should repairs be necessary, please call CLARITY at
1 (540) 427-3505 for a Return Authorization Number.

947411

Reviews: