Cisco NCS 1000 Installation Manual Download

Page: 1 / 14

Install Cisco NCS 1000 32-Channel Mux/Demux
Patch Panel

This chapter contains tasks to install Cisco NCS 1000 32-Channel Mux/Demux Patch Panel.

In this chapter, "mux/demux panel" refers to the "Cisco NCS 1000 32-Channel Mux/Demux Patch Panel".

Note

•

Rack Compatibility, on page 1

•

Ground Description, on page 2

•

Rack Mount Warnings, on page 4

•

Install the Adapter Brackets, on page 5

•

Install NCS 1000 32-Channel Mux/Demux Patch Panels, on page 7

•

Install and Route Fiber-Optic and USB Cables, on page 10

•

Cleaning and Maintaining Fiber-Optic Connectors, on page 12

•

Customer-supplied Cleaning Materials, on page 13

•

Cleaning the Optical Mating Adapter , on page 13

Rack Compatibility

The mux/demux panels can be installed in a standard ANSI/EIA (19"), ANSI (23"), or ETSI (21") rack.

• The rack can be two post type or four post type rack.

• The 19" and 23" racks must be compliant with "EIA Universal" holes.

• The ETSI rack must be compliant with "ETSI Universal" holes.

Install Cisco NCS 1000 32-Channel Mux/Demux Patch Panel

Summary of Contents for NCS 1000















Search results

Summary of Contents for NCS 1000

Reviews:

Related manuals for NCS 1000

Brands by name

Popular brands

Cisco NCS 1000, Installation Manual

Search results

Summary of Contents for NCS 1000

Reviews:

Related manuals for NCS 1000

Brands by name

Popular brands