A-1
Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide
OL-17440-01
A P P E N D I X
A
Repackaging the Router
Revised: March 16, 2009, OL-17440-01
Introduction
This appendix describes two separate but related router repackaging tasks:
•
How to remove the router from the equipment rack and repackage the router
for shipment if it becomes necessary to transport it to another location or
return it to Cisco Systems.
•
How to repackage a defective chassis to return it to the factory.
Where appropriate, you are referred to specific procedures in
Chapter 3,
“Installing the Router,”
and
Chapter 5, “Maintaining the Router.”
This appendix contains the following sections:
•
Repackaging the Routers, page A-1
•
Repackaging the Replaced Router Chassis, page A-24
Repackaging the Routers
This section describes how to remove the entire router system from the equipment
rack and repackage the router should it become necessary to transport it to another
location or return it to Cisco Systems.
