Central Machinery 96154 Assembly And Operation Instructions Manual Download

Page: 1 / 30

OHV GAS ENGINE - HORIZONTAL

MOdEL 9

9856

- 13 HP

MOdEL 96154 - 11 HP

ASSEMbLy ANd OPERATION INSTRucTIONS

IMPORTANT!

your Warranty is

voided if:

You do not put

Engine oil in the

Engine’s crankcase

prior to its first use.

Never run the Engine

with low or no oil.

Running the Engine

with low or no oil will

permanently damage

the Engine.

Due to continuing improvements, actual product may differ slightly from the product described herein.

Distributed exclusively by Harbor Freight Tools.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

TO PREVENT SERIOuS INjuRy, REAd ANd uNdERSTANd

ALL WARNINGS ANd INSTRucTIONS bEfORE uSE.

2007 by Harbor Freight Tools

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

for technical questions or replacement parts, please call 1-800-444-3353.

Summary of Contents for 96154































Search results

Summary of Contents for 96154

Reviews:

Related manuals for 96154

Brands by name

Popular brands

Central Machinery 96154, Assembly And Operation Instructions Manual

Search results

Summary of Contents for 96154

Reviews:

Related manuals for 96154

Brands by name

Popular brands