Cen-Tec CARBON FIBER REACH KIT Manual Download

Page: 1 / 8

CARBON FIBER REACH KIT MANUAL

Thank you for your purchase of the Cen-Tec Systems carbon

fiber Reach system designed for cleaning of elevated surfaces

to a height of 40 feet without the use of ladders or elevated

platforms. The 94753 Reach system allows cleaning with one,

two or three lightweight carbon fiber poles as necessary to the

application. A full compliment of adaptor wands and cleaning

nozzles as well as convenient storage bags for storage and

transport are all included in the solution.

Contact Information

1807 Morrissey Drive • Bloomington, IL • 61704 • US

Phone: 309-664-0328 • Toll Free: 800-833-2822 • Fax: 309-663-8766

E-mail: [email protected] • Website: www.centecsystems.com

Summary of Contents for CARBON FIBER REACH KIT

Page 3: ...e attached to a 1 5 hose for smaller vacuums such as backpacks The poles can be connected in series using the same snap release system Using two poles provided cleaning of surfaces from 25 to 30 feet depending on the adaptor wand and cleaning nozzle selected for the job Adding the extension pole between the base wand and upper wand permits cleaning of surfaces up to 40 feet ...

Page 4: ...avoid damage to the wands collapse the wand until the red band disappears and lock the wand in place This captured length protects the stability of the wand system at height and prevent damage to the wand from unsupported leverage when working against the surface being cleaned The top pole has a chrome metal locking adaptor to attach the desired wand on the end ...

Page 5: ... positive connection that will not separate during use Each of the four adaptor wands features an ABS compression locking system for securing the cleaning nozzle to the wand This locking mechanism complete the system with all components from the floor to the cleaning nozzle engaging the surface locked in place preventing unintended separation ...