1
Operation Guide ANALOG (MAC)
MA1007-EA
[Modules 5125 and 5167]
To set the time
When the second hand is at 12 o’clock, pull out the
11
crown to the second click to stop it1
Set the hands by rotating the crown1 Move the
21
minute hand four or five minutes past the setting
you want, and then back them up to the setting1
Push the crown back in on a time signal to resume
31
timekeeping1
To set the day and day of the week
Avoid setting the day and day of the week between
•
9:00 p1m1 and 5:00 a1m1 The day and day of the
week may not change in the following day if you do1
Pull out the crown to the first click1
11
Set the day by rotating the crown counterclockwise1
21
Set the day of the week by rotating the crown clockwise1
31
Push the crown back in to its normal position1
41
For watch with the elapsed time bezel
•
Rotate the elapsed time bezel to align the
mark with the
minute hand1
After certain amount of time elapsed, read the graduation on the
elapsed time bezel which the minute hand points to1
The elapsed time is indicated1
Specifications
Module No1
Accuracy at normal
temperature
(per month)
Battery type
Battery life
5125/5128
±20 seconds
SR626SW
Approx1 3 years
5167
±20 seconds
SR920SW
Approx1 5 years
5180/5199
±20 seconds
SR621SW
Approx1 3 years
Elapsed time bezel
Crown
(Normal position)
First click
(Day, day of week setting)
Second click
(Time setting)
Your watch may differ somewhat from the one shown in the illustration1
•
Notes
Some water resistant models are equipped with a screw lock crown1
•
With such models, you must unscrew the crown in the direction
•
noted in the illustration to loosen it before you can pull it out1
Do not pull too forcibly on such crowns1
Also note that such watches are not water resistant while their
•
crowns are loosened1 Be sure to screw the crowns back in as
far as they will go after making any setting1
[Modules 5128, 5180, and 5199]
To set the time
When the second hand is at 12 o’clock, pull out the
11
crown to the second click to stop it1
Set the hands by rotating the crown1 Move the
21
minute hand four or five minutes past the setting
you want, and then back them up to the setting1
Push the crown back in on a time signal to resume
31
timekeeping1
To set the day
Avoid setting the day between 9:00 p1m1 and 1:00
•
a1m1 The day may not change in the following day if
you do1
Pull out the crown to the first click1
11
Set the day by rotating the crown1
21
Push the crown back in to its normal position1
31
First click (Day setting)
Second click
(Time setting)
Crown
(Normal position)
