PARTS LIST
1
Radio Mount
1
Feed Tube
1
Antenna Reflector
1
AZ/EL Mount
1
Mast
2
Hose Clamps
2
Carriage Bolt .25 x 20
1
Hex Bolt .25-20 x 1.5"
3
Flange Nut .25-20
3
Flat Washers .25-20
1
Spacer
1
Carriage Bolt #10 x 1.25"
1
#10 Hex Nut
2
U Bolts 5/16
2
V-Bracket
4
Star Nut
1
Canopy Module Radio
QTY
DESCRIPTION
BACKHAUL MODULE
SUBSCRIBER MODULE REFLECTOR (ONLY)
with REFLECTOR (BHRF)
with REFLECTOR
(27RD)
RADIO MOUNT
CANOPY
MODULE
RADIO
HOSE CLAMP
(2 PLACES)
AZ/EL MOUNT
MAST
U BOLT
(2 PLACES)
V-BRACKET
(2 PLACES)
SPACER
CARRIAGE BOLT
#10 x 1.25"
HEX BOLT
.25-20 x1.5"
FEED
TUBE
FLANGE NUT
.25-20
CARRIAGE BOLT
.25 X 20
(2 PLACES)
#10 HEX
NUT
FLAT WASHER
.25-20
FLANGE NUT
.25-20
(3 PLACES)
FLAT WASHER
.25-20
(3 PLACES)
STAR NUT
(4 PLACES)
ANTENNA
REFLECTOR
http://www.motorola.com/canopy
Sales Support: 866-515-5825
Technical Support: 888-605-2552 (+1 217 824 9742)
REFLECTOR ASSEMBLY and INSTALLATION
27 RD REFLECTOR
Tools Needed:
7/16 inch wrench or adjustable wrench
Flat blade screwdriver or 5/16 inch socket for hose clamps and ground screw
1/2 inch wrench for U-Bolts - Backhaul only
3/8" wrench for #10 nut
Tighten Hose
Clamps securely
so the Radio is
snug to the mount
with no gaps at
the lower support
rib.
4
Loosen and open hose clamps. Slide clamps through the two
openings in the Radio above and below the mount as shown in
this illustration. Close hose clamps attaching radio to mount.
3
Slide Radio into mount as shown.
2
RADIO MOUNT
RADIO
Place Antenna Reflector on flat surface or table.
Attach AZ/EL Mount to Reflector using Carriage Bolts,
Flat Washers, and Flange Nuts. Tighten nuts securely.
1
RADIO
RADIO
MOUNT
HOSE
CLAMPS
CARRIAGE
BOLT
FLAT WASHER
FLANGE NUT
REFLECTOR
AZ/EL
MOUNT
HOSE
CLAMP
9/04 ECN9000000 8000973-01
RADIO
MOUNT
HOSE CLAMP
ADJUSTMENT
SCREW
(FACING
RADIO)
