Page
1
of
6
Lawn Scarifier
The CAMON LS42 Lawn Scarifier has been
designed by Tracmaster for removing the dead
thatch and moss from lawns and other grassed
areas.
The benefit of scarifying a lawn is that it allows
air, water and nutrients to reach the roots of the
grass whilst removing unwanted dead and foreign
material.
Starting the Lawn Scarifier
This machine is operated by lifting the lever located underneath the top of the handlebar.
It is a two-stage process.
1.
Press the grey lever locking catch.
2.
Press the black operating lever.
The black lever increases the engine speed to a level that will engage the centrifugal clutch fitted to
the engine drive shaft.
Once the clutch has been engaged it will transfer the engine power to the rotor shaft that will rotate
at high speeds within the chassis of the Scarifier.
Height Adjustment
The height of the blades of the lawn Scarifier is altered using the two large knobs at the front of the
machine.
The top knob is connected to the centre of the front axle via a threaded rod. Rotating the knob in
each direction will raise or lower the front axle in relation to the main chassis of the machine and in
turn alter the height of the blades with the chassis.
The second knob located below the top knob on the threaded rod is used to fix the position of the
threaded rod and consequently the height of the blades relative to the front axle.
