A.
Eye Piece
B.
Diopter Adjustment
C.
Power Button
D.
Mode Button
E.
Slope Button
F.
Charging Port
LCD DISPLAY
A.
Zero-In Aiming Square
B.
Laser Indicator
C.
P.A.T. Mode Indicator
D.
Pulse Indicator
E.
Distance
F.
Unit of Measure
G.
Angle of Incline/Decline
H.
Slope Adjusted Distance
RANGEFINDER DIAGRAM
CALLAWAY
MICRO
PRO
LASER RANGEFINDER
MANUAL
H
4.
Unit of Measure
- To change the unit of measure from Yards
to Meters, start with the device powered off. Then
HOLD
the
Mode Button
for 3 sec. The unit of measure is indicated by a
“
Y
” or “
M
” shown directly to the right of the distance displayed.
SLOPE FUNCTION
To turn
Slope
on/off, press the
“S”
button on the top of the unit
1.
If
GREEN
is flashing:
Slope function is off
. The Laser is
tournament legal when the slope is turned off.
2.
If
RED
is flashing:
Slope function is enabled
. Slope adjusted
yardage will be displayed after every time the laser is fired.
The Laser is not tournament legal when the slope is enabled.
SLOPE ON
SLOPE OFF
CHARGING
FOR MORE SUPPORT VISIT:
www.CallawayDMD.com/product-support
Caution: Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
1.
Insert the USB-C charger end into the Micro Pro & then insert
the USB end of the charging cord into a USB charging port or
AC adapter (not included). The recommended USB charging
rate is 5V, 1A.
2.
A complete full charge will take about 6 hours. the indicator
light will turn green when charging is completed.
3.
A full charge should last 100+ rounds of golf
Front indicator
lights:
