background image

www.bullard.com

Spectrum Series® Continuous Flow Airline 

Respirator Instruction Manual

Type C NIOSH Approval No. 
TC-19C-0505 Continuous-Flow Class - F30 Series Flow Control
TC-19C-0506 Continuous-Flow Class - F40 Series Flow Control
TC-19C-0507 Continuous-Flow Class -  AC1000 Series Flow 

Control

TC-19C-0508 Continuous-Flow Class -  HC2400 Series Flow 

Control

TC-19C-0509 Continuous-Flow Class - CT Series Flow Control
TC-19C-0510 Continuous-Flow Class - HCT Series Flow Control

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS 

RESPIRATOR. SAVE THIS MANUAL FOR FUTURE USE.

Table of Contents

APPROVAL LABEL .............................................................................................2-7

EXPLODED VIEW DIAGRAM ............................................................................... 8

GENERAL INFORMATION .................................................................................... 9

COMPONENT CONCEPT ...................................................................................... 9

WARNINGS ..................................................................................................10, 11

OPERATIONS ..................................................................................................... 12

SPECIAL USER INSTRUCTIONS / BREATHING AIR PRESSURE TABLE .......13-19

RESPIRATOR ASSEMBLY

Putting Respirator On ............................................................................... 20 
Taking Respirator Off ................................................................................ 20

INSPECTION, CLEANING AND STORAGE ......................................................... 21

FIT TESTING ...................................................................................................... 21

PARTS AND ACCESSORIES FOR SPECTRUM RESPIRATORS .......................22-23

RETURN AUTHORIzATIONS .............................................................................. 23

Summary of Contents for AC1000 Series

























Reviews: