Buffalo Tools PC3000 Instruction Manual Download

Page: 1 / 23

ITEM # PC3000

3000 LB PLATE COMPACTOR

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation & maintenance. Every effort has been

made to ensure the accuracy of this manual. These instructions are not meant to cover every possible

condition and situation that may occur. We reserve the right to change this product at any time without

prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,

DO NOT OPERATE THIS PRODUCT!

HAVE QUESTIONS OR PROBLEMS? CONTACT CUSTOMER SERVICE

If you experience a problem or need parts for this product, visit our website http://www.buffalotools.com

or call our customer help line at

1-866-460-9436, Monday-Friday, 8 AM - 4 PM Central Time

. A copy

of the sales receipt is required.

FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.

Summary of Contents for PC3000
























Search results

Summary of Contents for PC3000

Reviews:

Related manuals for PC3000

Brands by name

Popular brands

Buffalo Tools PC3000, Instruction Manual

Search results

Summary of Contents for PC3000

Reviews:

Related manuals for PC3000

Brands by name

Popular brands