![background image](http://html1.mh-extra.com/html/bryant/legacy-95-916sa/legacy-95-916sa_product-data_2822630001.webp)
+
Product Data
A11264
Representative drawing only. Some product models may vary.
The 916SA Multipoise Condensing Gas Furnace features the
single-stage Legacy
™
System. The fixed-speeds, constant torque (MCT)
ECM blower motor is at the heart of the electrical efficiency provided by
this furnace. With an Annual Fuel Utilization Efficiency (AFUE) of
96.2% AFUE, this furnace provides added savings over standard gas
furnaces. Improved serviceability with the 3 digit status display and
NFC enabled board allowing setup via the service tech app. This Legacy
Gas Furnace features 4-way multipoise installation flexibility, and is
available in model eleven sizes. All sizes except the 26,000 BTUh model
can
be vented for direct vent/two-pipe, venti
lated combustion air, or
single-pipe applications. The 26,000 BTUh model can use the same
2-pipe venting system using outside air for combustion, but is not
considered direct-vent. A Bryant Legacy Control and Legacy Air
Conditioner or Heat Pump, can be used to form a complete Legacy Line
System. All sizes are design certified in Canada. Specific sizes are
design certified for use in Manufactured Housing (Mobile Home)
applications when used with factory-approved MH accessory kit.
PERFORMANCE
• Multi 18-speed, constant torque (MCT) ECM blower motor for
electrically efficient operation all year long in heating, cooling and
continuous fan operation.
• Enhanced diagnostics with easy to read 3-digit display for faults and
status.
• Single-speed inducer motor, and single-stage gas valve.
• Silicon Nitride PerfectLight
™
Hot Surface Igniter.
• Perfect Humidity
®
technology removes more moisture than a standard
furnace during cooling operation (when installed with a matched air
conditioner or heat pump)
• Adjustable blower speed for heating and cooling.
• Aluminized-steel primary heat exchanger.
• Stainless-steel condensing secondary heat exchanger.
INSTALLATION FLEXIBILITY
• On-board NFC antenna makes setup a tap away when using the
Bryant service technician app.
• 4-way multipoise design for upflow, downflow or horizontal
installation, with unique vent elbow for optional venting
through-the-cabinet downflow venting capability.
• Factory-configured ready for upflow applications.
• Ideal height 35” (889 mm) cabinet: short enough for taller coils, but
still allows enough room for service.
• Two-pipe venting, single-pipe venting or ventilated combustion air.
APPLICATIONS
• Approved for Twinning applications with accessory kit (48060M17,
048080M17, 060080M21, 60100M21, 66120M24, 66140M24
models, only).
• Approved for Manufactured Housing/Mobile Home applications with
MH accessory kit.
• Convertible to propane with gas conversion accessory kit.
CERTIFICATIONS
• All sizes meet ENERGY STAR
®
Version 4.1 criteria for gas furnaces:
95%+ AFUE.
• Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air
leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with
ASHRAE standard 193.
• All sizes can be installed in air quality management districts with a 40
ng/J NOx emissions requirements.
A200350
916SA
Legacy™ 95, Single-Stage, Multi 18-Speed ECM,
Condensing Gas Furnace
WARNING
!
CARBON MONOXIDE POISONING AND FIRE
HAZARD
Failure to follow this warning could result in personal injury, death,
and/or property damage.
This furnace is not designed for use in recreation vehicles or outdoors.
This furnace is designed for use in manufactured (Mobile) homes when
an optional Mobile Home accessory kit is installed.
Failure to follow this warning could result in personal injury, death,
and/or property damage.