![background image](http://html.mh-extra.com/html/box-doccia/nina/nina_assembly-instructions_2798101001.webp)
FIRST STAGE
SECOND STAGE
3.1
3.2
THIRD STAGE
FOURTH STAGE
Assembly instructions
Slide the left folding door in both
upper and lower rail profile, as shown
in figure, making sure that all door
supports are inserted in the rail profile.
To make the operation easier cluster
the folding doors.
FIFTH STAGE
SIXTH STAGE
2.1
2.2
Angle bracket “X”
n. 2
Angle bracket“1”
n. 2
n. 2
n. 2
Spare parts
n. 3
n. 2
Anchors and screws
n.10
n. 2
Level, pencil, awl, hammer, drill, drill bit 6 mm,
cross screwdriver, silicone caulking gun.
Assembly tools
Assembly instructions
Slide the right folding door in both
upper and lower rail profile, as shown
in figure, making sure that all door
supports are inserted in the rail profile.
To make the operation easier cluster
the folding doors.
Inner side shower compartment
Side to fix
to wall
Outer side compartment
Assemby instructions
Take the right-side profile, which has two small holes (in the
middle) for fixing the magnetic plate (Fig. 2.1) and place it, as
shown in the figure, with the widest part facing outward.
Place an angle bracket marked by the number "1" in the upper
part (Fig. 2.2) and an angle bracket marked by an "X" in the
lower part (Fig. 2.3).
IMPORTANT: The sides of the angle bracket marked by the "X"
and "1" should not be inserted within the profile, but must
remain outside, so that symbols remain visible.
Inner side shower compartment
Side to fix
to wall
Outer side compartment
Assembly instructions
Take the left-side profile and place it, as shown in the figure,
with the widest part facing outward. Place an angle bracket
marked by the number "1" in the upper part (Fig. 3.1) and an
angle bracket marked by an "X" in the lower part (Fig. 3.2).
IMPORTANT: The sides of the angle bracket marked by the "X"
and "1" should not be inserted within the profile, but must
remain outside, so that symbols remain visible
Assembly instructions
Insert the upper and lower rail
profile in the angle brackets of the
previously assembled left side
profile.
NINA
CENTRAL OPENING
ASSEMBLY INSTRUCTIONS
Folding door
Attachment door profile
Rail profile
Side profile
Side profile section
Side profile section