SNAPPER-XP/S8 OWNER'S MANUAL
Congratulations on your purchase of the Bonica's Snapper XP, with the innovative extra
protection against moisture provided by the Snapper Skin. The system consists of the
Digital Camera, the Skin and the Housing. Please read this carefully as the integrity of
the system is necessary to protect your camera from moisture damage.
The Snapper Skin is made of silicone, the same material as most quality diving mask.
The front lens is tempered optical glass and the back lens is made of polycarbonate. The
silicone Skin is elastic and quite tough, but can be cut by sharp object or torn if stretched
overly, especially in thin areas around the buttons. Stretch it by grabbing the thicker areas
around the edge of the opening while avoiding direct pressure on the thin areas. Do not
use if it is torn. Never take your system into water without the protection of the Skin.
Moisture damage of the digital camera is not under warranty.
The Snapper Skin by itself is rated to 3 feet (1m) only, hence it is not designed for
swimming and snorkeling. It protects the camera from rain, snow, sand and scratches.
Use the camera in the Skin for any outdoor activities. However, for submerged use,
always have it inside the housing. While inside the housing, there is a bracket on the
case-back that presses the lens onto the silicone Skin, so in case the housing leaks, water
at high pressure will not be able to penetrate into the Skin.
Your housing has been manufactured from the finest materials today's technology has to
offer and can readily deal with the harsh environment found at depth and in seawater. All
metals are either marine grade stainless steel or nickel-plated solid brass. The housing is
manufactured from tough polycarbonate but it is a plastic so it can be scratched. The lens
is tempered optical glass, which can also be scratched if not treated with respect. The
main seal is made of silicone and does NOT need any grease and is relatively
maintenance free.
! IMPORTANT!
Use only a soft damp cloth to wipe the housing and the Skin - never use solvents - use
microfibre cloth to remove any dirt or fingerprints on the lens surface - never use hot
water or glass cleaner on any of the lenses and scratches are not covered under warranty.
