![background image](http://html.mh-extra.com/html/bobrick/b-3574/b-3574_technical-data_2781810001.webp)
continued . . .
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet.
Rev. 10/4/16
R/A, S/C
Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions.
© 2016 by Bobrick Washroom Equipment, Inc.
Technical Data
17-3/16''
435mm
30-5/8''
780mm
S
S
15-3/16''
385mm
11-7/16''
290mm
1''
25mm
Typ.
3-3/4''
95mm
S
S
Toilet-Seat-Cover
Dispenser
Toilet Tissue
Dispenser (2)
3-15/16''
100mm
S
28-3/4''
730mm
Recommended Cutout Height Off Floor
59''
1500mm
3''
75mm
Grab Bar
(Not Furnished)
33''
840mm
to
Floor
Sanitary
Napkin
Disposal
Panel
Lock
& Key (2)
3/16''
5mm
Finish Face of Wall
Recommended Cutout Height Off Floor For Accessib
le Design
42-3/8''
1075mm
Shelf
Upper
Door
Centerline of Toilet Tissue
Dispenser shall be 7'' to 9''
(180 to 230mm) in Front of Toilet.
CL
Removable
Waste
Receptacle
27-13/16''
705mm
16-3/8''
415mm
Lower
Door
CL
Outlet of Toilet Tissue Roll
shall be 18'' (460mm) ICC/ANSI
or 15'' (380mm) ADA Above Floor
5-5/8''
140
mm
Rough Wall Opening
16'' (405mm) wide
29-1/4'' (745mm) high
4'' (102mm) minimum recessed depth
See Designer's Notes under Installation for
Rough Wall Opening Location Information
MATERIALS:
Cabinet
—
18-8, Type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin finish.
Flange
—
18-8, Type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless
construc tion.
Doors (2)
—
18-8, Type-304, 18-gauge (1.2mm) stainless steel with satin finish. One-piece, seamless construction. Secured to
cabinet with a full-length stainless steel piano-hinge. Equipped with a tumbler lock keyed like other Bobrick washroom
accessories.
Toilet Tissue Dispensers (2)
— .100" (2.5mm) thick ABS. Equipped with two theft-resistant, heavy-duty, one-piece molded
ABS spindles.
Disposal Panel
— 18-8, Type-304, 22-gauge (0.8mm) stainless steel with hemmed edges; exposed surface has satin finish.
Secured to cabinet with a spring-loaded, full-length stainless steel piano-hinge. Equipped with an international graphic symbols
identifying napkin disposal.
Waste Receptacle
— Leak-proof molded polyethylene. Removable for servicing. Capacity: 0.8-gal. (3.0-L).
OPERATION:
Doors unlock with key provided and swing open for filling. Toilet seat-cover dispenser holds 500 single- or half-fold paper
covers. Spindles may be removed from cabinet only when door is open. Receptacle is removable for servicing. Unit holds two
standard-core toilet tissue rolls up to 5-1/4'' (135mm) diameter (1800 sheets).
Designer's Note:
It is recommended that one full toilet tissue roll remain wrapped until the other roll has been depleted to avoid
wasting ends of both rolls.
ClassicSeries
®
RECESSED
TOILET SEAT-COVER DISPENSER,
SANITARY NAPKIN DISPOSAL,
AND TOILET TISSUE DISPENSER
B-357
4