INSTRUCTIONS FOR THE ASSEMBLY OF THE
APALA 3
-
WAY PULL
-
OUT KITCHEN FILTER TAP
1) PLEASE NOTE
Before installing the tap, make sure that the pipes
are connected correctly supplying hot & cold water.
If you are in front of the faucet, the hot water out-
let should be on the le side and the cold water
outlet on the right side.
Make sure the water supply system is equipped
with strainers to ensure that no dirt, such as sand,
rust, limescale or other has entered the tap head.
Make sure there is a 35mm hole in the worktop or
sink.
tel
-
01403 701988
