![background image](http://html.mh-extra.com/html/bluetrek/s2/s2_user-manual_2778508001.webp)
PAGE 1 / 6
BLUETREK S2 user guide
EC-Declaration of Conformity
We, Innovi Technologies Ltd of
31/F China Online Centre,
333 Lockhart Road,
Wan Chai, Hong Kong
declare under our sole responsibility that our product
BLUETREK G3
To which this declaration is in conformity with the appropriate standards
EN300 328-02
EN301 489-17
EN301 489-01
EN50371
EN60065
following the provisions of Radio Equipment and Telecommunication Equipment
directive 1999/5/EC.
October 2004
Guillaume Ponticelli, Director of Development
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
Caution:
Changes or modifications to this Bluetooth® headset not expressly approved
by the Manufacturer could void the user’s authority to operate the equipment.
Industry Canada notice to users and product statements
To prevent radio interference to the licensed service, this device is intended to be
operated indoors and away from windows to provide maximum shielding. Equipment (or
its transmit antenna) that is installed outdoors is subject to licensing.
Compliance to Industry Canada, technical specifications have been made in a
declaration of conformity. It does not imply that Industry Canada approved the
equipment.
Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer under license.
IMPORTANT
Before using your Bluetrek
®
S2 headset for the first time, you must charge it
continuously for about 8 hours, until the blue indicator light turns on. Please
refer to the “Charging Bluetrek
®
S2” section of this manual.
PAGE 2 / 6
1. Introduction
The Bluetrek
®
S2 headset is a wireless headset based on the Bluetooth
®
technology.
The Bluetooth
®
technology is a standard for wireless short distance radio
communications. Devices like a headset and a mobile phone can communicate with
each other without wires within approximately 10 meters.
Bluetrek
®
S2 is a qualified Bluetooth
®
headset that complies with the Bluetooth
®
1.1
protocol. It supports two profiles: Headset profile and Hands-free profile.
It will work with any qualified Bluetooth
®
device that supports the Headset profile or the
Hands-free profile.
To check the list of qualified Bluetooth
®
mobile phones working with Bluetrek
®
S2,
please consult:
www.bluetrek.com
The Bluetrek
®
S2 headset can be used with a qualified Bluetooth
®
mobile phone, or
another Bluetooth
®
device supporting the Headset or Hands-free profile. This user
guide focuses on the use of this Bluetooth
®
headset with a Bluetooth
®
mobile phone,
which is the most common application.
Your Bluetrek
®
S2 will allow you to answer a call, make a call (if your phone has voice
controls), and adjust volume directly on your headset, without the need to touch your
mobile phone.
The Bluetrek
®
S2 headset has 3 buttons:
•
“TALK“ button (central button),
•
1 “VOL+“ button,
•
1 “VOL-“ button.
Before using Bluetrek
®
S2 headset, you must:
. Charge the headset; please refer to the “Charging Bluetrek
®
S2” section of this user
guide.
. Pair the headset with a mobile phone. Please refer to the “Pairing Bluetrek
®
S2”
section of this manual.