Thank you for purchasing the Blink Portable WiFi.
This WiFi device provides you with a high speed wireless network
connection.
This document will help you understand your Blink Portable WiFi so you can start using it right away.
Please read this document carefully before using your Blink Portable WiFi.
For detailed information about the functions and configurations of the Blink Portable WiFi, refer to the
online help section on the Web Management page that comes with the Blink Portable WiFi.
For detailed instructions to login to the Web Management page, refer to "Logging in to the Web
Management page".
Getting to know your Blink Portable WiFi
Appearance
Signal indicator
Wi-Fi indicator
Battery indicator
SMS indicator
Power button
Strap hole
Micro USB port
Indicator
Indicator
Status
Description
Signal
Green
Strong signal
Orange
Weak signal
Red
No signal
Wi-Fi
Green
Wi-Fi turned on
Battery
Green
Sufficient battery
Blinking green
Charging the battery
Red
Low battery
Messages
Green
New message
Blinking green
Inbox full
SSID and wireless network encryption key
When a WiFi device establishes a connection to the Blink Portable WiFi for the first time, you may need
to enter the default Service Set Identifier (SSID) and wireless network encryption key.
These are printed on the Blink Portable WiFi label.
It is recommended that you can log in to the Web Management page and change your SSID and
wireless network encryption key.
Getting started
Installing a SIM card and the battery
Caution:
Use a standard SIM card compatible with the Blink Portable WiFi;
otherwise you will damage your Blink Portable WiFi.
Install the SIM card and the battery according to the illustration.
Installing and removing the microSD Card
Install and remove the microSD card according to the illustration.
Note:
The microSD card is an optional accessory. If no microSD card is included in the package, you can
purchase one separately.
