background image

5 BBL Single Wall Hybrid Brewhouse V6 

© Blichmann Engineering, LLC 2022 

For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts

1

5 BBL Single Wall Hybrid Brewhouse

Assembly, Operation, & Maintenance

Congratulations on your purchase, and thank you for selecting the 5 BBL Hybrid 

Brewhouse from Blichmann Engineering™. We are confident that it will provide you 
years of service and many gallons of outstanding beer. This manual will familiarize 

you with the use, assembly, and the sanitation procedures for the product.

Sections labeled “Warning” can lead to serious injury or death if not followed. Please thoroughly read these sections 

and understand them completely before use. If you do not understand them or have any questions, contact your  

retailer or Blichmann Engineering (www.BlichmannEngineering.com) before use.

 

Sections labeled “Caution” can lead to equipment damage or unsatisfactory performance of the equipment. Please 

read these sections thoroughly. If you have any questions, contact your retailer or Blichmann Engineering  

(www.BlichmannEngineering.com) before use.

 

Sections labeled “Important” should specifically be followed to ensure satisfactory results with the product. 

WARNING:

CAUTION:

 

IMPORTANT:

IMPORTANT INFORMATION

PLEASE READ AND THOROUGHLY UNDERSTAND THIS MANUAL PRIOR TO USE 

 

FOR IMPORTANT SAFETY INFORMATION!

What’s In the Box?

IMPORTANT: Power demand for the brewhouse is 156A at 208V (three phase), 66A at 480V (three phase) or 228A at 240V (single phase).  

Select a main breaker setting for 20% above the appropriate amperage to avoid nuisance tripping or as directed by your local codes.

Item Number

Description

Qty

BEPS-MLT-5BBL-SW

5BBL Single Wall MLT

1

BEPS-HLT-5BBL-SW

5BBL Single Wall HLT

1

BEPS-BK-5BBL-SW

5BBL Single Wall Boil Kettle

1

BEPS-Stand-5BBL

Kettle Stand 5BBL

3

BEPS-CP-5-240V-SW

OR

BEPS-CP-5-208V-SW

5BBL Control Panel 240V Single Phase

OR

5BBL Control Panel 208V 3-Phase

1

BEPS-SanitaryHeater-5BBL

OR

BEPS-SanitaryHeater-5-208V

5BBL 240V Sanitary Heater Assembly Set of 3

OR

5BBL 208V Sanitary Heater Assembly Set of 3

2

BEPS-PUMP-15HP

1/5hp Brewery Pump

1

BEPS-Pump-1HP

1HP Brewing Pump

1

BEPS-CHILLER-2.0SQM

Pro Series Chiller

1

Item Number

Description

Qty

BE-000633-00

1.5” Sanitary Tri-Clamp

1

BE-000859-00

2.5” Sanitary Cap

1

BE-000861-00

2.5” Sanitary Tri-Clamp

1

BE-000863-00

1.5” TC Elbow - 90°

1

BE-000866-00

2.5” TC Gasket

1

BE-000868-00

1.5” TC Gasket

1

BE-001356-00

1.5” TC Butterfly Valve

1

BE-001236-00

CIP Speer for Pin Style Spray Ball

1

BE-001396-00

CIP Rotating Sprayball - 2.5” OD, 1.5” Pin Style Connection

1

BEPS-MLT-PARTS-5BBL

 - Single Wall Mash Tun Parts Kit Parts List:

Summary of Contents for BEPS-BK-5BBL-SW

















Reviews: