Blaupunkt BLUEBOT XPOWER+ App Instruction Download

Page: 1 / 4

APP

INSTRUCTION

Make sure the robot is

fully charged.

It is not possible to register

the robot in the app while it is

physically in

the docking station.

Remove the robot from

the docking station (charger).

Place the robot close to your

router.

If you have already completed the following procedure, reset the robot vacuum by setting the

red switch on the side of the robot to ‘off’ for at least ten minutes.

Need

assistance?

bluebotxpower.com

00800 357 00 753

Summary of Contents for BLUEBOT XPOWER+

Page 1: ...ng station Remove the robot from the docking station charger Place the robot close to your router 2 3 1 If you have already completed the following procedure reset the robot vacuum by setting the red switch on the side of the robot to off for at least ten minutes Need assistance bluebotxpower com blaupunktrobotics de teknihall de 00800 357 00 753 ...

Page 2: ... frequency of both 2 4 5 0 GHz Open the app and register yourself select Europe as your area Make sure the on off switch is set to on This is the red switch on the side of the robot 5 Make sure your phone is connected to the Wi Fi network 8 Select the robot model you have bluebotXP 6 9 4 7 bluebotxpower com blaupunktrobotics de teknihall de 00800 357 00 753 ...

Page 3: ...r Wi Fi signal The robot works on both 2 4 5 0 GHz Continue to the next step in the app Use the blue button to Reset 11 XPOWER Press and hold the button on the top until it begins to blink 12 10 13 bluebotxpower com blaupunktrobotics de teknihall de 00800 357 00 753 ...

Page 4: ...s Select the network that begins with blaupunkt_ return to the app For Android phones Do NOT use the Back button use the Home button instead The app will now connect to the robot Hold the telephone in close proximity to the robot 15 16 14 Enter your password for Wi Fi connection 17 bluebotxpower com blaupunktrobotics de teknihall de 00800 357 00 753 ...