![background image](http://html.mh-extra.com/html/black-widow-security/gd-f02d/gd-f02d_user-manual_2765450001.webp)
User manual
ALARM REMOTE CONTROL
Model: GD-F02D
Name:
ALARM REMOTE CONTROL
Model No.:
GD-F02D
Operation Frequency:
433.92MHz
Channel Numbers:
1
Modulation Type:
GFSK
Antenna Type:
PCB Antenna
Antenna Gain:
-2.0dBi
Power Supply:
DC3.0V from battery
Function introduction:
1 button (arming), 2 button (disarming); press each button once, remote
control code for 1.5 seconds.
NOTE
:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the