BEFORE INSTALLING THE STARTER DISABLE/KEYLESS ENTRY SYSTEM
•
DO read through this installation manual.
•
DO NOT install the control module in an engine compartment.
•
The alarm may arm itself when power is first connected.This is a normal condition.
ITEMS SUPPLIED WITH THE STARTER DISABLE/KEYLESS ENTRY SYSTEM
•
Receiver and control module
•
Valet/override switch
•
Two 2-Button or 3-button, code learning
•
LED status indicator
transmitters
•
Wiring harness, fuseholder, & fuse
•
Door lock harness
OPTIONAL ACCESSORIES
Backup battery...............................................
BWS-500
Window roll up...........................................................
WRM-2
Remote starter ..............................................
RAS-101
Power door lock.........................................................
PDL-50
Trunk release .....................................................
TR-100
Relay ....................................................................................
SPDT
Starter disable relay socket.........................
BRS-003
5-wire door lock relay & socket ...............
BRS-008P16
(+) door lock Inverter..............................
BW-34516
SPECIFICATIONS
Operating voltage..................+12 VDC Neg. Ground
Code learning..........................................3 Codes Max.
Current consumption............5 mA (max) disarmed.
Door lock/unlock output .........................(-) 500 mA.
Channel 2 output drive.............(-) 500 mA variable.
Remote control transmit frequency.......................310 mHz.
Passive arming delay..................................30 Seconds approx.
Auxiliary output drive ...............................250 mA maximum.
Flashing output drive .................................(-) 250 mA 30 sec.
Dome light output......................................(-) 250 mA 30 sec.
I N S T A L L A T I O N M A N U A L
STARTER
DISABLE/
KEYLESS
ENTRY
SYSTEM
I N S T A L L A T I O N M A N U A L
