background image

AIRLESS SPRAYER PRO 5.5

ENGLISH • ESPAÑOL • FRANÇAIS

1

PLEASE READ AND SAVE THIS INSTRUCTION MANUAL

Airless Sprayer

MODEL PRO 5.5
POWER PAINT SPRAYER

WARNING  TO REDUCE THE RISK OF INJURY, USER MUST

READ AND UNDERSTAND INSTRUCTION MANUAL.
FOR HOUSEHOLD USE ONLY.
KEEP CHILDREN AWAY FROM WORKING AREA.
For Customer Service Call:
1-800-264-5442 or 763-780-5115, 
8 a.m. to 5 p.m. CST.

Made in Taiwan

Rociador sin aire

MODELO PRO 5.5
ROCIADOR DE PINTURA
POTENTE

ADVERTENCIA  PARA DISMINUIR LOS RIESGOS DE

LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL 
DE INSTRUCCIONES.

SÓLO PARA USO DOMÉSTICO.

MANTENGA A LOS NIÑOS LEJOS DEL ÁREA DE TRABAJO.

Para comunicarse con el dpto. de servicio al cliente, llame al:
1-800-264-5442 ó 763-780-5115, 8 a.m. a 5 p.m. 
(hora del Centro de EE.UU.).

Hecho en Taiwán

Pulvérisateur sans air

comprimé

MODÈLE PRO 5.5
PULVÉRISATEUR À PEINTURE
ÉLECTRIQUE

AVERTISSEMENT  POUR RÉDUIRE LES RISQUES DE

BLESSURE, L’UTILISATEUR DOIT LIRE ET COMPRENDRE LE
MANUEL D’INSTRUCTION.

DESTINÉ À UN USAGE MÉNAGER SEULEMENT.

TENEZ LES ENFANTS ÉLOIGNÉS DE L’AIRE DE TRAVAIL.

Pour le service à la clientèle, appelez au :
1-800-264-5442 ou 763-780-5115, de 8h00 à 17h00, 
heure normale du Centre.

Fabriqué à Taïwan

Summary of Contents for PRO 5.5












Reviews: