background image

 

OWNERS MANUAL

 

MODEL 

WK400/WK400A

 

 

IS CERTIFIED TO: 

 

 

 

 

 
 
 

 

Unit Serial #

__________________________       

 

Purchased From

________________________      

 

Company Address

 ______________________     

 

_____________________________________    

 

_____________________________________    

 

Name of Installer

_______________________    

 

Installer Telephone #

  ___________________

    

 

Date Installed

__________________________    

 

IMPORTANT  

This manual must be given to the homeowner. Please read the warranty  

and return the warranty card to initiate coverage.

 

 

We Strongly Recommend The Use Of A Carbon Monoxide Detector When 

Using Any Product That Consumes Fossil Fuels. 

 

It is the responsibility of the person or company installing this furnace to

 verify before 

the installation 

that the furnace certifications shown on this page meet or exceed all local, 

state and regulatory requirements for installation and use of this furnace. Failure to do so 
voids all claims and warranties.

  

 

 

 

   

 

 

 

 

March 2010     

 

 

 

 

Aussi disponible en Français 

 

 

UL 391 

 

 

CAN/CSA B366.1 

 

Summary of Contents for WK400

















Reviews: