HPB3K
High Pressure Bottle System
READ ALL INSTRUCTIONS AND WARNINGS IN THIS
MANUAL BEFORE USING THIS AIRGUN
P/N HPB3K-515
Always wear eye protection when working with compressed gas! Venting gas can and does accelerate particles of
dirt and debris to high velocity. Keep all persons without eye protection out of the immediate area!
Parts List
1 – Bottle
2 – Regulator
3 – Gauge
4 – Fill Nipple
5 – 3k Burst Disk
6 – 5k Burst Disk
The Benjamin HPB3K High Pressure Bottle is manufactured for the Crosman Corporation by Pres-
sure Specialists Inc, 186 Virginia Rd. Crystal Lake, IL 60014 WWW.PSIGURU.COM
DANGER MISUSE OF THIS PRODUCT MAY CAUSE SERIOUS INJURY OR DEATH. DO NOT USE
FOR PAINTBALL. INTENDED FOR BENJAMIN PRE-CHARGED PNEUMATIC RIFLES ONLY!
1.0 FILLING YOUR BENJAMIN™ HPB3K HIGH PRESSURE BOTTLE SYSTEM
Your Benjamin PHB3K is designed for use with high pressure air. Contact a center such as a dive shop or
paintball shop that is experienced in high pressure systems to get your
system filled.
UNDER NO CIRCUMSTANCES SHOULD THE BENJAMIN SYSTEM BE
FILLED WITH PURE OXYGEN!
When having your BENJAMIN™ HPB3K system filled, do not exceed
the pressure rating shown on your system’s storage bottle! A high pres-
sure gauge (part #3) showing bottle pressure is standard on
your system.
1.1 Your BENJAMIN HPB3K is equipped with the standard Quick Disconnect
“QD Style” fill nipple (part # 4). Your HPB3K must only be filled with Clean,
Dry compressed air, to a maximum pressure of 3000 PSI.
1.2 Be sure to have a qualified technician fill your HPB3K. Centers such as
dive shops or paintball shops that are experienced in high pressure systems
should be qualified to fill the Benjamin HPB3K system.
1.3 Your HPB3K bottle is stamped with a date of manufacture as shown in
figure 1.3a. This date is important as it represents the beginning of the 5 year
bottle certification. Bottles older than 5 years from the stamped date must
be retested by a hydrostatic test. Dive shops can perform this test and
re-certification. It is illegal to fill a bottle that is beyond 5 years from the
last certification.
2.0 CONNECTING YOUR BENJAMIN™ HPB3K
2.1 The BENJAMIN™ HPB3K is factory set to deliver compressed air at 2000-2100 PSI with the use of the
optional Benjamin Universal Fill Adapter, model FAH002, (see figure 2.1a) available at crosman.com. Refer to
the manual included with the Benjamin FAH002 for further connecting and filling instructions.
3.0 THE SAFETY SYSTEM
DANGER: MISUSE OF THIS PRODUCT MAY
CAUSE SERIOUS INJURY OR DEATH.
3.1 The regulator is equipped with an ASTM AP-
PROVED 5000 PSI Bottle Burst Disk (stamped 5K).
This is required by the Department of Transportation
(D.O.T.) DO NOT tamper with this system.
In addition to the required 5000 PSI safety burst
disk, the regulator has a 3000 PSI safety Burst Disk
(stamped 3K). The 3000 PSI safety burst disk is there to protect
the operator in the unlikely event that the regulator fails.
REMEMBER, most regulator failures are the result of con-
taminated air.
3.2 If the 3000 PSI safety burst disk vents, it did so for a reason.
Discontinue use immediately and contact Pressure Specialists
Inc. at 1-815-477-0007 EXT 321 for further instructions.
3.3 ALWAYS check to make certain there is NO gap between the
Bottle and Regulator seal (see figure 3.4a).
3.4 IF there is a gap:
STOP!!! THE CYLINDER CAN FLY OFF WITH ENOUGH
FORCE TO KILL IF THE VALVE UNSCREWS FROM THE
CYLINDER!
DO NOT FILL OR USE YOUR SYSTEM!
Place the system on the ground and wait for the system to completely de-pressurize. Contact a qualified
airsmith immediately or call Pressure Specialists Inc. for assistance at 1-815-477-0007 EXT 321
LIMITED 90 DAY WARRANTY
This product is warranted to the retail consumer for 90 days from date of retail purchase against defects in
material and workmanship and is transferable. You should retain the original sales receipt as record of date of
purchase.
WHAT IS COVERED
Replacement parts and labor. Transportation charges to consumer for repaired product.
WHAT IS NOT COVERED
Transportation charges to Crosman Corporation. Damages caused by abuse, modification or failure to
perform normal maintenance. Any other expense. CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES,
OR INCIDENTAL EXPENSES INCLUDING DAMAGE TO PROPERTY. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITA-
TION OR EXCLUSION MAY NOT APPLY TO YOU.
HOW TO OBTAIN WARRANTY PERFORMANCE
Call Crosman customer service at 800-724-7486 for details on how to proceed with sending the item in for
repair. You must contact Crosman prior to shipping your product.
IMPLIED WARRANTIES
ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO ONE YEAR FROM DATE OF RETAIL
PURCHASE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
To the extent any provision of this warranty is prohibited by federal, state or municipal law, which cannot be
preempted, it shall not be applicable. This warranty gives you specific legal rights and you may also have
other rights, which vary, from state to state.
Crosman® and Benjamin® are registered trademarks of Crosman Corporation in the United States.
Distributed by
Crosman Corporation
7629 Routes 5 & 20
E. Bloomfield, NY 14443
1-800-7AIRGUN (724-7486)
www.crosman.com
