1
ExpertLine
EL45x99A1x / EL45x74A1x / EL45x49A1x
✓
✗
Ω
1
2
Short Guide –
Please refer to full assembly and mounting instructions
1
Cutting the ExpertLine contact profile to length
2
Mounting contact end pieces
ENGLISH
394386B
08/19
Total length of the assembled safety edge
= L
total
L
contact profile
= L
total
– 24 mm
3
Intermediate check / Resistance measurement
The sealant is highly adhesive; dust and dirt particles will stick to it
immediately on contact. Therefore, proceed with particular care and
ensure that the working environment is kept clean and tidy until it is
pressed into place.
Hold the profile shank at an acute angle and check for axial alignment
when pressing the contact end piece in.
Connect the resistor plug and the cable, actuate the sensor
at several points.
The sealant should overflow all the way round the
sealing edge.
