Bauer 21713E-B Owner'S Manual & Safety Instructions Download

Page: 1 / 20

Wheel Sold

Separately

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

Owner’s Manual & Safety Instructions

Save This Manual

Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

21j

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2020 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Summary of Contents for 21713E-B





















Search results

Summary of Contents for 21713E-B

Reviews:

Related manuals for 21713E-B

Brands by name

Popular brands

Bauer 21713E-B, Owner'S Manual & Safety Instructions

Search results

Summary of Contents for 21713E-B

Reviews:

Related manuals for 21713E-B

Brands by name

Popular brands