Original Instructions
June 22, 2023
p/n: 232898 Rev. B
232898
K30 Pro Optical Sensor Quick Start Guide
•
•
•
•
•
•
•
•
•
•
•
•
Quick Start Guide
30 mm Programmable Multicolor RGB Optical Sensor and Indicator
This guide is designed to help you set up and install the
K30 Pro Optical Sensor. For complete information on programming, performance,
troubleshooting, dimensions, and accessories, please refer to the Instruction Manual at
ber
231384
to view the Instruction Manual. Use of this document assumes familiarity with pertinent industry standards and practices.
Programmable using Banner's Pro Editor software and Pro Converter Cable
Up to 7 colors in one device (14 colors using Pro Editor)
Devices are completely selfcontained—no controller needed
Teachable modes with color feedback for ease of use
Touchless activation removes the need for physical force to activate
Rated
IP65
10 V DC to 30 V DC operation
Resistant to ambient light, EMI, and RFI interference
Sensing and indication in one device
WARNING:
Do not use this device for personnel protection
Using this device for personnel protection could result in serious injury or death.
This device does not include the selfchecking redundant circuitry necessary to allow its use in personnel safe
ty applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output
condition.
Models
** Models with a quick disconnect
require a mating cordset
Family
K30
Color/Control
Q = 5-pin or 8-pin integral
M12 quick disconnect
depending on model **
Q
Connector
M = Momentary
Output
Function
Activation
Method
Output State
P
AF100
A
M
Style
AF100 = 100mm adjustable field*
RGB7 = Programmable Multicolor
AF1000 = 1000mm adjustable field*
Overview
The
K30 Pro Optical Sensor
is an adjustable field optical sensor that can detect a wide variety of materials and objects.
D0
Measurement
Reference Point
D1
D2
Detection Area
Reliable detection of a stationary
and moving object
Detection not
possible
Model
D0 (mm)
Switch Point D1 (mm)
Switch Point D2 (mm)
PVS28D
0
20
500
© Banner Engineering Corp.
