background image

WARNING: This product guide contains important information 

necessary for the proper assembly and safe use of the 

appliance.

Read and follow all warnings and instructions before 

assembling and using the appliance.

Follow all warnings and instructions when using the appliance.

Follow all leak-check procedures in the Product Guide before 

using the appliance.

This appliance is for outdoor use only.

DANGER

Failure to follow these instructions could result in fire, explosion or 

burn hazard which could cause property damage, personal injury 

or death.

Never operate this appliance unattended.

Never operate this appliance within 10 ft (3.0 m) 

of any structure, combustible material or other 

gas cylinder.

Never operate this appliance within 25 ft (7.5 m) 

of any flammable liquid.

If a fire should occur, keep away from the 

appliance and immediately call your fire

department. Do not attempt to extinguish

an oil or grease fire with water.

1.

2.

3.

4.

If you smell gas:

Shut off gas to the appliance.

Extinguish any open flame.

If odor continues, keep away from appliance 

and immediately call your fire department.

Failure to follow these instructions could result in fire or explosion 

which could cause property damage, personal injury or death.

DANGER

1.

2.

3.

Important, Retain for Future Reference: Read Carefully

Product Guide

Model O-AJLXX-O-000

Wood fired performance at home

Portable Gas

Pizza Oven Box

www.bakerstonebox.com - (855) 657 OVEN (6836)

3617 W. MacArthur Blvd, Unit 500

Santa Ana, California, USA 92704

Summary of Contents for O-AJLXX-O-000






















Reviews: