background image

 1

PATIO HEATER 

OPERATION INSTRUCTIONS

05/2020

554PH1SS, 554PH1BZ, 554PH1STL, 554PH1BLK

If you smell gas:

1. 

 Shut off gas to the appliance.

2. 

Extinguish any open flame.

3. 

If odor continues, keep away from the appliance and 

immediately call your gas supplier or fire department.

 DANGER

Do not store or use gasoline or other flammable vapors 

and liquids in the vicinity of this or any other appliance. An 

LP-cylinder not connected for use shall not be stored in the 

vicinity of this or any other appliance.

 WARNING

For Outdoor Use Only.

 WARNING

Improper installation, adjustment, alteration, service or 

maintenance can cause injury or property damage. Read the 

owner’s manual thoroughly before installing or servicing this 

equipment. If the information in this manual is not followed 

exactly, a fire or explosion may result causing property 

damage, personal injury or loss of life.

 WARNING

3177588

CARBON MONOXIDE HAZARD

This appliance can produce carbon 

monoxide, which has no odor. Using it in 

an enclosed space can kill you. Never use 

this appliance in an enclosed space such as 

a camper, tent, car, or home.

 DANGER

KEEP THIS MANUAL FOR FUTURE REFERENCE.

TABLE OF CONTENTS

Safety Information

.............................................................

Hardware & Contents........................................................

Assembly Instructions.......................................................

Operation...........................................................................

Troubleshooting.................................................................

Equipment Limited Warranty............................................

2-3

4-5

6-10

11

12-13

14

Summary of Contents for 554PH1BLK















Reviews: