1
©2021 Babcock-Davis, Inc.
Rev 9/2021
Single-Part Stair Nosings
–
Ribbed Bar
Models: BSTSB
GENERAL DESCRIPTION
Stair treads and nosings are designed for years of safe egress.
Proper installation is critical to the product performance.
Locally accepted installation practices and procedures should
be followed to ensure a safe stairway system that meets all
local code requirements, including Occupational Safety and
Health Administration (OSHA), Americans with Disabilities Act
(ADA), International Code Council (ICC) and International
Building Code (IBC).
Introd Safety
Please read the complete instructions carefully before beginning any work. To ensure
proper installation and performance of the stair nosing, the following actions must be
completed by the installing contractor. Failure to do so will affect product warranty.
GENERAL SAFETY PRECAUTIONS
Improper selection, installation, or use can cause personal injury or property damage. It
is solely the responsibility of the user, through its own analysis to select products suitable for their specific application
requirements, ensure they are properly maintained, and limit their use to its intended purpose. Follow proper local,
state, and federal regulations for proper installation and operation requirements.
Transpor Storage
o Inspect all shipments and materials for missing or damaged components and hardware.
o Material must be stored in a clean, dry location.
Preparation
•
Locate the packing slip(s) and/or shop drawings.
•
Verify that all products listed on the packing slip are included in the package.
•
Check the products for damage. If products are damaged, report a freight claim immediately
and leave the products in their packaging. If you sign for products without reporting damage
you waive your right to a freight claim and will be responsible for their replacement cost.
•
Read the instructions thoroughly before beginning installation.
Installation, Operation
+ Maintenance Manual
