background image

GB

B.E.G.

LUXOMAT

®

 AL5-LC

Mounting instructions - Floodlight AL5-LC 500

1. Function

The 500 W floodlight is supplied with a plug-in socket only for 

the 

LUXOMAT

®

 LC-Click-N or LC-plus series. By means of this any 

combination of 140°, 200° or 280° version can be achieved 

with a minimum of stockkeeping.
You can get 

LUXOMAT

®

 LC-Click-N motion detector with 2 

different detection areas: 140° or 200°. 

LUXOMAT

®

 LC-plus 280 comes with a detection area of 280°. 

So you can attach the best motion detector to the floodlight to 

cover every field of application.

11

D

LUXOMAT

®

 AL5-LC 500

4. Installation

 

Before installation the mains to be cut off. 

 

 

The installation can only be done by an electrician.

 

 

Two holes for 6 mm pegs to be drilled in a distance of 50 mm. 

 

The enclosed hexagon screws to be screwed in and now hang 

on the floodlight.

 

 

(Do not forget the washers!)

 

 

Open the junction box by unfastening the 4 screws of the 

cover. In order to get the right protection against wateringress 

insert the cable through the cable inlet and connect the wires 

accordingly to schematic. Fasten cover again.

 

 

Adjust floodlight for the right detection and illumination field 

and tighten the bracket hexagon screws. 

 

 

(See also 

LUXOMAT

®

 motion detector manual).

5

Pluging-in

For plugging-in to produce 

with the hand the right coun-

ter pressure.

Click

Click

Unplugging

To remove the motion detec-

tor from the socket to use a 

small screwdriver as shown 

in picture.

5. Dimensions (mm)

145

184

130

17

5

160

10

2

3. The right mounting place

The floodlight must be mounted on a solid wall, protected 

against rain, wind and sunradiation.

The recommended mounting height is 3 m. The distance 

between floodlight and illuminated surface must be a minimum 

of at least 1 m. Also the distance to the street or to a neighbour-

ing house should be considered before fixing the unit.

When the walking direction is lateral to the detection field 

of the motion detector, an optimum functioning of the motion 

detector will be achieved. Moving frontally towards the motion 

detector gives a much shorter range.

 

 

(See also 

LUXOMAT

®

 LC-Click-N and LC-plus 280 manual)

ca. 30°

min. 80 cm

max.

Power-supply: 

 

230 V~ ±10 %

Lamp:

 

 

R7 s (118 mm) max. 50

0 W  

Protection:

  

IP44 / I / 

Housing:

 

 

 made of die-cast aluminium

Ambient temperature:

  

-2

5

° C to +5

0

°

C

Dimensions: 

 

H 160 x W 184 x D 290 mm

2. Technical data

Description

Colour

Part.-Nr.

AL5-LC

white

92405

AL5-LC

black

92403

Accessory

Fluo lamp  

33316

LC-CLick-N 140 / 200

 

LC-plus 280

GB

Lateral mounting to 

 

walking direction

3m

Mounting hight

Reviews: